Diagnostic Monitoring is not implemented.
1、华为模块接上思科设备后查看诊断情况
show interfaces gigabitEthernet 3/17 transceiver
回显:
Diagnostic Monitoring is not implemented.
意思是该SFP模块不支持思科DOM特性。

2、进到接口视图
#conf t
(config-if)#interface gigabitEthernet 3/17

3、敲进下面的隐藏命令(这里的命令不能tab键补全)
service unsupported-transceiver
//使支持不同厂商模块

4、临时关掉GBIC序号检测机制
敲完上面的命令会退出接口视图需要重新进一下接口视图
no errdisable detect cause gbic-invalid
每个SFP交换机在运行时对密钥进行验证,若SFP不包含合法的密钥,那么相应的端口关闭,在没有插入Cisco的合法的SFP前,该端口将不能发送或接收任何数据包

5、敲完后退出去保存一下
wr

6、可以看到收发光情况了
show interfaces gigabitEthernet 3/17 transceiver detail

声明:本网站引用、摘录或转载内容仅供网站访问者交流或参考,不代表本站立场,如存在版权或非法内容,请联系站长删除,联系邮箱:site.kefu@qq.com。
阅读量:39
阅读量:82
阅读量:194
阅读量:113
阅读量:22