中频治疗仪操作步骤

1、打开包装盒，取出主机、电机插线和自粘电极；

Open the packaging box and take out the main machine, electrode wire and self-adhesive electrodes;

2、电极插线的一端插入主机，另一端插入两片自粘电极；

One port of the electrode wire is inserted into the main machine, and the other pulse port is inserted into two self-adhesive electrodes;

3、揭开自粘电极的保护膜，把两片自粘电极分开，贴到患处；

Uncover the protective film of the self-adhesive electrode, separate the two self-adhesive electrodes and stick them to the affected parts;

4、开机或关机——按主机电源开关持续3秒钟；

Power on or off -- press the host power switch for 3 seconds;

5、根据需要选择“针灸”、“按摩”、“锤击”、“刮痧”等治疗方法；

Select "acupuncture", "massage", "hammer" and "scraping" as needed;

6、脉冲强度选“+”加强，选“-”减弱；

Select "+" to enhance pulse intensity and "-" to decrease it;

7、停止治疗前先关机再取下自粘电极，并贴回保护膜上；

Power off before stopping treatment, then remove the self-adhesive electrodes and paste them back onto the protective film;

8、如果自粘电极不粘，可用自来水冲洗，晾干再用。

If the self-adhesive electrodes are not sticky,wash with tap water and let dry before use.