如何使用Latex制作三线表格？
1、程序算例1：注意黑色部分的标记，与图对应
\begin{figure}
\centering
\begin{tabular}{|c|c|}
\hline
% after \\: \hline or \cline{col1-col2} \cline{col3-col4} ...
AAA & BBB \\
CCC & DDD \\
\hline
\end{tabular}
\caption{SSSS}
\end{figure}
%%
1、程序算例2：注意黑色部分的标记，与图对应
\begin{figure}
\centering
\begin{tabular}{|c|c|}
% \hline
% after \\: \hline or \cline{col1-col2} \cline{col3-col4} ...
AAA & BBB \\
CCC & DDD \\
% \hline
\end{tabular}
\caption{SSSS}
\end{figure}
1、程序算例3：注意黑色部分的标记，与图对应
\begin{figure}
\centering
\begin{tabular}{cc}
% \hline
% after \\: \hline or \cline{col1-col2} \cline{col3-col4} ...
AAA & BBB \\
CCC & DDD \\
% \hline
\end{tabular}
\caption{SSSS}
\end{figure}
1、程序算例1：注意黑色部分的标记
\begin{table}
\tbl{Radio-band beaming model parameters for\\ {FSRQs and BL Lacs.}}
{\begin{tabular}[l]{@{}lcccccc}
\toprule
Class$^{\rm a}$ & $\gamma _1$ & $\gamma _2$$^{\rm b}$
& $\langle \gamma \rangle$
& $G$ & $|{\bm f}|$ & $\theta _{c}$ \\
\colrule
BL Lacs &5 & 36 & 7 & $-4.0$ & $1.0\times 10^{-2}$ & 10$^\circ$ \\
FSRQs & 5 & 40 & 11 & $-2.3$ & $0.5\times 10^{-2}$ & 14$^\circ$ \\
\botrule
\end{tabular}}
\tabnote{$^{\rm a}$This footnote shows what footnote symbols to use.}
\tabnote{$^{\rm b}$This footnote shows the text turning over when a long footnote is added.}
\label{symbols}
\end{table}
1、程序算例1：注意黑色部分的标记
% \begin{table}[!h]
\begin{table}
\centering
\caption{Optimal results for two different load cases}
\label{Tab:03}
\begin{tabular}{ccccc}
\hline
% after \\: \hline or \cline{col1-col2} \cline{col3-col4} ...
Cases & Component shapes & Initial layout & Optimized layout & Objective function\\
\hline
\multirow{3}{*}{Case 1} &rectellipse & \tabincell{c}{(50, 30, $0$) \\ (70, 30, $0$)}
& \tabincell{c}{(35.145, 24.633, 2.0298) \\ (85.182, 24.542, -0.7411)}
& \multirow{3}{*}{67.359} \\
\cline{2-4}
& calabash-shaped & \tabincell{c}{(10, 30, $\pi /2$) \\ (110, 30, $\pi /2$)}
& \tabincell{c}{(8.635, 28.556, 0.836) \\ (110.299, 28.578, 2.283)}
& \\
\cline{1-5}
\multirow{3}{*}{Case 2} &rectellipse & \tabincell{c}{(50, 30, $0$) \\ (70, 30, $0$)}
& \tabincell{c}{(36.049, 35.603, 0.506) \\ (83.621, 35.087, 0.885)}
& \multirow{3}{*}{199.781} \\
\cline{2-4}
& calabash-shaped & \tabincell{c}{(10, 30, $\pi /2$) \\ (110, 30, $\pi /2$)}
& \tabincell{c}{(8.469, 31.537, 0.788)$^a$ \\ (112.882, 30.057, 1.864)}
& \\
\cline{1-5}
\hline
\end{tabular}
\footnotesize{$^a$ The smallest spatial unit is county}\\
\end{table}
1、程序算例1：注意黑色部分的标记
\begin{table}
% table caption is above the table
\caption{Please write your table caption here}
\label{tab:1} % Give a unique label
% For LaTeX tables use
\begin{tabular}{lll}
\hline\noalign{\smallskip}
first & second & third \\
\noalign{\smallskip}\hline\noalign{\smallskip}
number & number & number \\
number & number & number \\
\noalign{\smallskip}\hline
\end{tabular}
\end{table}
1、% Please add the following required packages to your document preamble:
% \usepackage{multirow}
\begin{table*}[]
\scriptsize
\centering
\caption{Optimized results of the circular arch for different slenderness and opening angles}
\label{Tab03}
\begin{tabular}{cccccccccc}
\toprule
\multirow{2}{*}{Opening angle} & \multicolumn{3}{c}{$R/r=10$} & \multicolumn{3}{c}{$R/r=25$} & \multicolumn{3}{c}{$R/r=50$} \\
\cmidrule(r){2-4} \cmidrule(r){5-7} \cmidrule(r){8-10}
& $\omega_{1} (\%)$ & $r_{{\rm min}}/r_0$ & $r_{{\rm max}}/r_0$
& $\omega_{1} (\%)$ & $r_{{\rm min}}/r_0$ & $r_{{\rm max}}/r_0$
& $\omega_{1} (\%)$ & $r_{{\rm min}}/r_0$ & $r_{{\rm max}}/r_0$ \\
\midrule
$\varphi=60^{\circ} $ &3.920 & 0.793 & 1.355 & 5.243 & 0.558 & 1.122 & 6.694 & 0.503 & 1.133 \\
$\varphi=90^{\circ} $ &4.061 & 0.660 & 1.106 & 7.242 & 0.500 & 1.136 & 8.060 & 0.501 & 1.140 \\
$\varphi=120^{\circ} $ &6.480 & 0.558 & 1.127 & 9.011 & 0.500 & 1.145 & 9.535 & 0.500 & 1.147 \\
$\varphi=150^{\circ} $ &8.756 & 0.500 & 1.142 & 10.763 & 0.500 & 1.153 & 11.126 & 0.500 & 1.155 \\
\bottomrule
\end{tabular}
\end{table*}
